105℃ LSHF Flame-Retardant EPDM Elastomer Irradiation-Crosslinkable Insulation Compound

105℃ LSHF Flame-Retardant EPDM Elastomer Irradiation-Crosslinkable Insulation Compound

105℃ LSHF Flame-Retardant EPDM Elastomer Irradiation-Crosslinkable Insulation Compound is mainly formulated with halogen-free non-toxic modified EPDM rubber as the base polymer, compounded with various additives. Through mixing and extrusion pelletization processes, it achieves exceptional processability, physical-mechanical properties, electrical insulation performance, and outstanding flame retardancy. During combustion, it releases no halogen acids and exhibits self-extinguishing behavior upon flame removal, significantly reducing toxic corrosive gas emissions and smoke generation. Cables manufactured with this material develop a smooth, rounded surface with superior elasticity and tactile quality after irradiation crosslinking. It is ideally suited for control cables and instrumentation cables.

105℃ LSHF Flame-Retardant EPDM Elastomer Irradiation-Crosslinkable Insulation Compound List

Model	Unit	108E
Item	/	Typical
Density	g/cm3	1.47
Tensile Strength	MPa	9.1
Elongation at Break	%	275
Air Oven Aging	℃×h	136×240
Tensile Strength Change Rate	%	-6
Elongation at Break Change Rate	%	-11
Hot Set (0.2MPa)	℃×min	250×15
Elongation under Load	%	38
Permanent Deformation after Cooling	%	1
Low-temperature Performance Test	℃	-45
Ozone Resistance Test	/	No cracking
Volume Resistivity at 20°C	Ω·cm	5.1×1014
Dielectric Strength at 20°C	kV/mm	25
Oxygen Index	%	30
Cable Flame Retardancy	/	DZ-1
Smoke Density: Smoke with flame (Dmy)	/	32
Smoke without flame (Dmw)	/	135
Halogen Acid Gas Content	mg/g	0
pH Value	/	6.3
Conductivity	μs/mm	2.2
Toxicity Index	/	1.9
Environmental Protection Requirements	Level	Conforms to EU RoHS Directive (2011/65/EU) and REACH Regulation (EC 1907/2006) Substances of Very High Concern (SVHC) provisions.

105℃ LSHF Flame-Retardant EPDM Elastomer Irradiation-Crosslinkable Insulation Compound Application

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound exhibits excellent processability, physical-mechanical properties, electrical insulation performance, and outstanding flame retardancy. It is mainly used in control cables, instrument cables, and meter connection cables.