105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound is primarily formulated with halogen-free, non-toxic elastomers as the base resin, compounded with various additives through mixing and extrusion pelletization. It exhibits excellent processability, physical-mechanical properties, electrical insulation performance, and outstanding flame retardancy. During combustion, it releases no halogen acids and is self-extinguishing upon flame removal, significantly reducing toxic corrosive gas emissions and smoke generation. Cables manufactured with this material develop a smooth, rounded, elastic surface with superior hand feel after irradiation cross-linking. It is primarily used in control cables, instrument cables, and meter connection cables.

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound List

Model	Unit	106E
Item	/	Typical
Density	g/cm3	1.46
Tensile Strength	MPa	9.7
Elongation at Break	%	221
Air Oven Aging	℃×h	136×240
Tensile Strength Change Rate	%	-2
Elongation at Break Change Rate	%	-8
Hot Set (0.2MPa)	℃×min	250×15
Elongation under Load	%	35
Permanent Deformation after Cooling	%	1
Low-temperature Performance Test	℃	-45
Ozone Resistance Test	/	No cracking
Volume Resistivity at 20°C	Ω·cm	5.5×1014
Dielectric Strength at 20°C	kV/mm	26
Oxygen Index	%	29
Cable Flame Retardancy	/	DZ-1
Smoke Density: Smoke with flame (Dmy)	/	41
Smoke without flame (Dmw)	/	136
Halogen Acid Gas Content	mg/g	0
pH Value	/	6.0
Conductivity	μs/mm	2.0
Toxicity Index	/	1.7
Environmental Protection Requirements	Level	Conforms to EU RoHS Directive (2011/65/EU) and REACH Regulation (EC 1907/2006) Substances of Very High Concern (SVHC) provisions.

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound Application

105℃ LSHF Flame-Retardant Elastomer Irradiated Insulating Compound exhibits excellent processability, physical-mechanical properties, electrical insulation performance, and outstanding flame retardancy. It is mainly used in control cables, instrument cables, and meter connection cables.