Home RM Drawing Stranding Extrusion Shielding Auxiliary Parts Recycling

Extrusion Technology Updates

Latest extrusion technologies for 500kV EHV insulation, micron-level thin-wall extrusion and biodegradable materials processing. Enables energy-efficient, high-precision intelligent manufacturing.

Causes for Uneven Outer Diameter in Cable ExtrusionWhat causes inconsistent outer diameter and bamboo-joint defects during cable extrusion? Details below:
Analysis of Scorching During Cable Extrusion ProcessWhat causes scorching during cable extrusion? The details are as follows:
Causes for Plastic Layer Thickness Deviation in Cable ExtrusionWhat causes positive/negative thickness deviations in cable extrusion plastic layers? How to resolve them? Details below:
Causes and Solutions for Lumps in Cable ExtrusionLumps may occur during cable extrusion. The causes and solutions are analyzed below:
Reasons for Avoiding Direct Water Cooling of Fluoroplastic (PTFE/FEP/PFA) Core Wires After ExtrusionThe copper with the highest copper content is also called red copper because of its color. The main component is copper plus silver, with the content of 99.5-99.95%. The main impurity elements are: phosphorus, bismuth, antimony, arsenic, iron, nickel, lea
Causes and Solutions for Irregular Bubbles in Extrusion ProcessWhat are the reasons for irregular bubbles in extrusion? The reasons and solutions for irregular bubbles during the extrusion process are as follows:
Causes of Poor Plasticization in Cable Extrusion ProcessWhat leads to poor plasticization during cable extrusion? The details are as follows: