Nylon-Modified Polyethylene (PE) Insulation Compound

Nylon-Modified Polyethylene Insulation Compound

Nylon-Modified Low-Density Polyethylene (LDPE) Insulation Compound is a cable insulation material based on polyethylene (PE) resin, modified with additives such as antioxidants and stabilizers. Its core function is to provide electrical insulation protection for wires and cables while delivering excellent mechanical and chemical properties. This insulation material is suitable for the insulation layer of power cables, control cables, lighting cables.

Nylon-Modified Polyethylene Insulation Compound List

Model	Unit	LDPE-7E
Item	/	Typical
Density	g/cm3	0.99
Melt Flow Index (MFI) (190°C, 2.16 kg)	g/10 min	1.3
Tensile Strength	MPa	21
Elongation at Break	%	280
Air Oven Aging	℃×h	100×240
Tensile Strength Change Rate	%	+1
Elongation at Break Change Rate	%	-6
Heat Deflection (90°C, 4h)	%	/
Thermal Shock	℃×h	130×1
Test Result	/	No cracking
Thermal Shrinkage Test	℃×h	100×1
Shrinkage Rate	%	1.8
Low-temperature Performance Test	℃	-25
Low-temperature Impact Brittleness Temperature	℃	-76
Ozone Resistance Test	/	No cracking
Environmental Stress Cracking Resistance	h	/
Thermal Stress Cracking Resistance	h	/
Artificial Weathering	h	/
Volume Resistivity at 20°C	Ω·cm	3.6×1016
Dielectric Strength at 20°C	kV/mm	28
Environmental Protection Requirements	/	Conforms to EU RoHS Directive (2011/65/EU) and REACH Regulation (EC 1907/2006) Substances of Very High Concern (SVHC) provisions.

Nylon-Modified Polyethylene Insulation Compound Application

Nylon-Modified Low-Density Polyethylene (LDPE) Insulation Compound exhibits excellent mechanical and chemical properties and is suitable for the insulation layer of communication cables, optical cables, submarine cables, local telephone cables, coaxial cables, control cables, and power cables. Details as follows:
Nylon-Modified PE Insulation Compound
Features: Water/oil resistance, high strength, thin-wall insulation.
Application: Special cables.