Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound

Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound

Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound is a high-performance cable insulation material made of thermoplastic polyurethane elastomer (TPU) as the matrix, added with halogen-free flame retardant system, and crosslinked by electron beam irradiation technology. It is suitable for high-voltage wiring harnesses of new energy vehicles, joint cables of industrial robots, special cables for ships, and connecting wires for medical equipment.

Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound List

Model	Unit	TPU-49E
Item	/	Typical
Density	g/cm3	1.31
Tensile Strength	MPa	26
Elongation at Break	%	420
Air Oven Aging	℃×h	121×240
Tensile Strength Change Rate	%	-15
Elongation at Break Change Rate	%	-12
Breakdown Voltage	kV/mm	18
Tear Strength	N/mm	23.5
Low-temperature Performance Test	℃	-40
Oxygen Index	%	26
Volume Resistivity	Ω·cm	4.3×1012
Compression Set (70℃x22 h)	%	50
Halogen Acid Gas Content	mg/g	0
pH Value	/	6.1
Conductivity	μs/mm	1.3
Fluorine Content	%	0
Environmental Protection Requirements	Level	Conforms to EU RoHS Directive (2011/65/EU) and REACH Regulation (EC 1907/2006) Substances of Very High Concern (SVHC) provisions.

Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound Application

Flame-Retardant Irradiation-Crosslinkable TPU Elastomer Insulation Compound is suitable for high-voltage wiring harnesses of new energy vehicles, joint cables of industrial robots, special cables for ships, and connecting wires for medical equipment.